Metal roofing is becoming increasingly common not just on commercial buildings, but on residential ones as well. If you've recently had a metal roof installation done on your home, you can enjoy the peace of mind in knowing that this durable type of roofing typically lasts anywhere from 40 to 70 years before needing to be replaced. And while metal roofing a very low-maintenance, there are still a few things you can do to make sure you get the longest possible life out of your new roof.
- If you are in the market for a flat roof for your house or commercial building, then you may want to consider a concrete roof. These roofs are durable, cheap, and can provide an aesthetic that slanted tile roofs simply can't. However, there are special concerns to take into consideration when opting for a flat concrete roof. It's Heavy Concrete roofs are generally several inches thick and can handle high-speed winds and torrential rains with ease.
- If you have black stains on your roof, you most likely have a build-up of algae. This algae is not dangerous or damaging in any way, but you may still want to remove it if you are concerned about the aesthetic qualities. Here is what you need to know. Don't Wash it Yourself The most important thing to understand when attempting to clear your roof of black stains and streaks is that you should not power-wash it off.
- There are some types of roofing damage that tend to be more common than others. These are the repair issues that you are going to want to make sure you know how to look for. Here are some of the things you are going to want to watch for and what can increase their occurrences. Damages to the flashing Flashing is a sheet of metal that is used to reinforce the areas of the roof that would be more susceptible to damage because they are at the creases of the roof or in areas where the roof meets something else, like a vent or a chimney.
- A leaking roof doesn't always mean you have a failed shingle or a puncture. The following are five common location of leaks that are sometimes overlooked. 1. Chimneys and Vent Flashing One of the most leak-prone areas of any roof is around the chimney and various vent stacks on your roof. The joint where these items emerge from your roof are typically sealed with flashing — metal sheets that are caulked into place with a sealant or roofing tar.